Ambit U10C022
Please follow these instructions to configure your Ambit U10C022 router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.
- You will need the current IP address of your phone adapter.
- If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
- If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
- If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
- Please write this IP Address down as you will need it in later steps
|
• Click on DMZ Host under the Advanced Gateway Setup in the left menu bar.
• Input the IP address of your phone adapter that you received in the first step of this process.
• Click on Apply to save the settings.
PLEASE NOTE: There have been reports that depending on your ISP the above steps may not be enough. If after completing the steps above you are still unable to get your phone adapter to register, or you are having problems making/receiving phone calls it may be necessary to bridge your Ambit U10C022 This is something that your ISP must do.
If you have any questions please call us toll free at (888)607-6937 option 3 for technical support.
