Ambit U10c019

Please follow these instructions to configure your Ambit U10c019 router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.100.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is admin The default password is cableroot

---

• If the above username doesnt work please contact your ISP and ask for the administrator login information for your router.

---

Click to enlarge

• Once logged in click on DMZ Host under the advanced gateway setup on the left menu bar.

---

Click to enlarge

• Once on the DMZ Host page, input the IP address of your phone adapter that you received in the first step of this process.

• Click on Apply to save the settings.

---

Note: If you are unable to place a call after 15 minutes, or any other irregularities appear, please contact our support department for additional assistance.