Beetel

Please follow these instructions to configure your Beetel router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.1.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is admin The default password is password

---

Once you log in, you will see this page.

---

Please go to Advanced Setup.
Then, go to Port Triggering.

---

You will need to insert an Application Name. Insert PP Phone.
You can now set the port ranges based on the ports on the Port Forwarding Page.

From the screenshot, you can see that the first one has been inserted already.

Once you insert all port ranges, you should be able to reboot your phone adapter and make calls after 2-3 minutes.

---