Edgemarc-Setting DHCP Mode

If you need to configure the Edgewater for DHCP, chances are you will be accessing the device via the LAN side, so this article assumes this is the case

• Connect a PC to one of the LAN ports and log into the Edgewater at the default gateway IP address http://192.168.1.1

The username and password needed to log into the Edgewater will be supplied by Phone Power. Please contact support if you do not have the username and password needed to log into the device.

• Click Network and then select the DHCP radio button.

• Click Submit at the bottom of the page to apply the settings. The Edgewater is now configured for DHCP.