Edgemarc-Setting Static IP

From PhonePower Knowledge Base
Jump to: navigation, search

If you need to configure the Edgewater for a static IP, chances are you will be accessing the device via the LAN side, so this article assumes this is the case


• Connect a PC to one of the LAN ports and log into the Edgewater at the default gateway IP address http://192.168.1.1


The username and password needed to log into the Edgewater will be supplied by Phone Power. Please contact support if you do not have the username and password needed to log into the device.


• Click Network and then select the Static IP radio button and populate the fields highlighted in the image below with the information you received from your ISP.


Static IP Address
Subnet Mask
Default Gateway


E4500-StaticIP1.jpg


• Click Submit at the bottom of the page to apply the settings. The Edgewater is now configured with the static IP address you defined.