Grandstream HT502 Menu Options

To access the Grandstream phone based menu, pick up the handset to the phone.

• Once you hear a dial tone, dial ***.

Menu	Voice Prompt	Options
Main Menu	“Enter a Menu Option”	Press “*” for the next menu option. Press “#” to return to the main menu. Enter 01-05, 07,10, 12-17,47 or 99 menu options.
01	“DHCP Mode”, “Static IP Mode”, "PPPoE Mode"	Press “9” to toggle the selection. If using “Static IP Mode” configure the IP address information using menus 02 to 05. If using “Dynamic IP Mode” all IP address information comes from the DHCP server automatically after reboot.
02	“IP Address“ IP address	The current WAN IP address is announced. If using “Static IP Mode” enter 12 digit new IP address.
03	“Subnet “ IP address	Same as menu 02
04	“Gateway “ IP address	Same as menu 02
05	“DNS Server “ IP address	Same as menu 02
07	Preferred Vocoder	Press “9” to move to the next selection in the list: • PCM U / PCM A • iLBC • G-726 • G-723 • G-729
10	“MAC Address”	Announces the Mac address of the unit.
12	WAN Port Web Access	Press “9” to toggle between enable / disable
13	Firmware Server IP Address	Announces current Firmware Server IP address. Enter 12 digit new IP address.
14	Configuration Server IP Address	Announces current Config Server Path IP address. Enter 12 digit new IP address.
15	Upgrade Protocol	Upgrade protocol for firmware and configuration update. Press “9” to toggle between TFTP / HTTP
16	Firmware Version	Firmware version information.
17	Firmware Upgrade	Firmware upgrade mode. Press “9” to toggle among the following three options: always check check when pre/suffix changes never upgrade
99	“RESET”	Press “9” to reboot the device Enter MAC address to restore factory default setting
Invalid Entry		Automatically returns to main menu