How to configure an Asus device to function with PhonePower

Please follow these instructions to configure your How to configure an Asus device to function with PhonePower router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.1.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is admin The default password is admin

---

Click to enlarge

• Once logged in click on the button labled LAN under advanced settings
• Click the button labeled DHCP Server in the new sub-menu

---

Click to enlarge

• Make sure Enable Manual Assignment is set to YES • Select the MAC Address of your phone adapter from the drop down menu under Manually Assign IP around DHCP List • If you have a Grandstream HT502 It should start with 00:0B:82 • If you have an Innomedia it should start with 00:10:99 • If you have an Obihai it should start with 9C:AD:EF • In the entry box to the right of the MAC address you selected enter the IP Address you wrote down at the start of this proccess. • Click Apply.

---

Click to enlarge

• Click WAN under the Advanced Menu

---

Click to enlarge

•In the WAN settings find and click on the button labled DMZ

---

Click to enlarge

• Select the bubble "Yes" next to Enable DMZ
• Set IP Address of Exposed Station to the same IP Address that you wrote down at the start of this proccess
• Click Apply

---

Once your ASUS has saved these settings, you will need to reboot the telephone adapter for these changes to take effect. Simply remove the power cord from the back of the phone adapter, wait 20 seconds, and put it back in. If you are unable to place a call after 15 minutes, or any other irregularities appear, please contact our support department for additional assistance.