Initial Sync Instructions for the SPA 922

From PhonePower Knowledge Base
Jump to: navigation, search

To configure your SPA922 to work with Phone Power's service, you must know the admin credentials.
If you do not, you should reset the device to the default factory configuration which does not have an admin password.

To reset the device to the default factory configuration:

  • Press the Option Key
Initial942 01.png
  • Select Option 14
Initial942 02.png
  • Then Press OK to Confirm
Initial942 03.png

To determine the IP address of the device:

  • Press the Option Key
  • Select Option 9
Initial942 04.png
  • After Pressing Select, You will see the Hardware’s IP address
Initial942 05.png

After you have the device's IP address, enter the following URL:

http://<<InsertDeviceIpHere>>/admin/resync?https://provision.phonepower.com/linksys/ProvisionXml.php?sn=$SN&mac=$MA

After your device reboots, the phone will display your phone number next to the softkeys when the device is ready to make and receive calls. At this time you will be ready to use your Phone Power service.

Retrieved from "https://www.phonepower.com/mediawiki/index.php?title=Initial_Sync_Instructions_for_the_SPA_922&oldid=11819"