Linksys WRT54G/WRT300N Series

Please follow these instructions to configure your Linksys WRT54G/WRT300N Series router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.1.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is admin The default password is admin

---

Note: Not all Linksys routers will have this option. If you do not see this option on this page in the router skip this step and continue with the rest of the setup steps.

Click to enlarge

• Click on Security.
• Click on the radio button next to Disabled and click on Save Settings.
• Click on Continue.

---

Click to enlarge

• Click on Applications and Gaming. • Click on Port Forwarding. • Assign the ports to the IP address of your phone adapter. • Forward port range 5000-5080 Protocol: UDP • Forward port range 10000-11000 Protocol: UDP • Forward port range 12060-12080 Protocol: UDP • Forward port range 16384-16472 Protocol: UDP • Forward port range 16600 - 16700 Protocol: UDP • Forward port range 4200-4200 Protocol: TCP • Forward port range 23-23 Protocol: TCP • Click Save Settings

---

Note: If you are unable to place a call after 15 minutes, or any other irregularities appear, please contact our support department for additional assistance.