Motorola SBG 900/940

WARNING: Do not attempt to configure these devices over a wireless connection.

---

Please follow these instructions to configure your Motorola SBG 900/940 router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.100.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is admin The default password is motorola

---

Click to enlarge

• Click on Gateway.

• Click on LAN.

• Click on DHCP Leases.

---

• On that page, find the MAC address next to the IP address of your phone adapter.
• Copy the MAC address and IP address of the phone adapter and paste them into Reserve New IP Address.
• Click the check mark under Bypass Firewall.
• For Host Name type PhonePower.
• Apply the settings.

---

Note: If you are unable to place a call after 15 minutes, or any other irregularities appear, please contact our support department for additional assistance.