Westell 9100
Please follow these instructions to configure your Westell 9100 router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.
- You will need the current IP address of your phone adapter.
- If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
- If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
- If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
- Please write this IP Address down as you will need it in later steps
|
• Click on Firewall Settings.
• Click on Yes to continue.
• Click on Port Forwarding in the left menu bar.
• Click New Entry at the bottom of the local host column to add a new port forwarding rule or service.
• Enter the IP address of your phone adapter you received in the first step of this process.
• Select User Defined from the pull down menu.
• Enter a service name for the port forwarding service. You can use any name, though we recommend you call it Phone Power.
• Click on New Server Ports.
• Select UDP from the protocols pull down list.
• Select Range in the source ports pull down list.
• Enter 5004 in the first range field, then enter 5012 in the second range field.
• Select Range for the destination ports and again enter 5004 and 5012 in the port number field.
• Now you should see your newly created rule. Click the New Server Ports button to make another rule.
• As before, select Range in the source ports pull down list.
• Enter 5060 in the first range field, then enter 5061 in the second range field.
• Select Range for the destination ports and enter 5060 and 5061 in the port number field.
• Click the OK button to complete the port forwarding rule.
• As before, select Range in the source ports pull down list.
• Enter 12060 in the first range field, then enter 12061 in the second range field.
• Select Range for the destination ports and enter 12060 and 12061 in the port number field.
• Click the OK button to complete the port forwarding rule.
| |
• Create a new port forwarding rule |
• Click the OK button again to complete the rule setup.
• You should now see the new rule in your list of rules if you completed the setup correctly.
Note: If you are unable to place a call after 15 minutes, or any other irregularities appear, please contact our support department for additional assistance.
