Zoom 5363

Please follow these instructions to configure your Zoom 5363 router to work with PhonePower. These instructions are only if you are connecting your phone adapter to your router.

---

• You will need the current IP address of your phone adapter.
  
• If you have a Grandstream phone adapter please refer to How to receive the current WAN IP Address on a Grandstream.
  
• If you have an Innomedia phone adapter please refer to How to receive the current WAN IP Address on an Innomedia.
  
• If you have an Obihai phone adapter please refer to How to receive the current WAN IP Address on an Obihai.
  
• Please write this IP Address down as you will need it in later steps

---

Open a web browser Enter http://192.168.0.1 into the address bar and press enter Log into the router. You will be prompted for a username and password. The default username is admin The default password is admin

---

Click: Router/Advanced/DMZ
Enter the IP of the ATA.
Click: Apply

---

Click: Options (under Advanced)
Deselect SIP - Enable (Under NAT ALG Status)
Scroll to the bottom and click Apply.